FAN FORCED CEILING HEATERS Fan forced ceiling heaters allow you to choose wattage during installation; shipped wired to highest wattage. Ceiling heaters feature a fan purge circuit that requires 4 wire supply when remote single pole wall thermostat is used (not included). Fan forced heaters are made with a durable 18 gauge steel front and powder coat finish. Manual reset thermal limit and steel block fin element on these electric ceiling heaters provide safety and efficiency in any environment. Propeller style fan blade is powered by a 1060 RPM motor offering 100 CFM. Include drywall depth embossments on the back can. Measures 12-1/8"L x 9-1/4"W x 3-5/8"D rough in. Grill measures 13"L x 9-13/16"W. UL approved. 1 year warranty. 12.13 L. 3.63 W. 9.25 H.

Ideal for High Heat Loss Areas That Wall Heaters Cannot Handle. Use Anywhere That Wall Space Is Not Available

Nutone Broan 655 / 659 Features: -Bathroom fan and heater with light. -Available in: -70 CFM. -50 CFM. . -White plastic grille. -70 CFM fan dimensions: 0.83" H x 1.583" W x 1" D. -50 CFM fan dimensions: 0.83" H x 1" W x 1.583" D. Fan strength: 70 CFM

Give Your Heating and Cooling System a Boost! The Amazing AirFlow Breeze works with your existing central heating and cooling system, drawing additional air to the problem areas in your home. Once you set your target comfort level, the built-in temperature sensor takes over! It will direct the powerful, yet quiet fan to pull extra warm or cool air out of weak registers, increasing air flow, and delivering the comfort you demand. By improving the air flow from your existing central heating and cooling system, the AirFlow Breeze provides an affordable alternative to window air conditioners, space heaters, costly attic fans and complex zoning systems. That's right! Increase your comfort, and save money too! To get technical for a moment, your furnace and air conditioner bring comfort to your home by moving air through ducts to each room in your house. When the fan from the main system cycles off there is still conditioned air lingering in ducts and crawl spaces. The AirFlow Breeze pulls this conditioned air to your rooms, keeping them more comfortable longer, so your furnace or air conditioner will run less often, lowering your utility bills! It's easy to install, with no tools necessary, fitting into most standard vent openings. Best of all, it's safe for children and pets due to low voltage operation. And don't worry, the stylish AirFlow Breeze blends into any room decor. Available in Almond or Brown. Fits into most standard 4 x 10 vent openings. Assembly"

Qmark CDF ceiling-mounted fan-forced heaters are designed for commercial and industrial areas requiring electric fan-forced heat. This product does not include the mounting enclosure. The CDFSE surface enclosures are designed to mount flat on the ceiling and extend only six inches into the room. Type CDFRE enclosures have no protrusions outside the recess box, allowing the heater to recess only seven inches into ceiling space. Mounts into permanent ceiling with trim ring. A thermal cutout shuts off the heater in the event of overheating and reactivates the heater when the temperature returns to normal. Optional thermostat mounts inside unit to control room temperature. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life. Comes in a navajo white finish. Mounting sleeve required for installation.

Please Note: The mounting sleeve is required for installation and must be purchased separately. 

Fan Forced Heavy-Duty Ceiling Mounted Heater, 4800/3600W at 240/208V - This high-capacity, heavy-duty fan forced ceiling heaters are designed for use almost anywhere in commercial, industrial or institutional areas requiring electric fan forced heaters in 1500 to 4800 watt capacity range where wall space is not available. They perform exceptionally well in such applications as entryways, hallways, restrooms, stores, detention environments, and similar large areas. They will accommodate pneumatic/electric or low voltage controls commonly used with computerized energy management systems. A 1/4" mesh screen deters insertion of foreign objects. 240/208 Volts, Phase, 4800/3600 Watts, 20 / 17.3 Amps. 21.75 L. 17.13 W. 8.13 H.

Qmark CDF ceiling-mounted fan-forced heaters are designed for commercial and industrial areas requiring electric fan-forced heat. This product does not include the mounting enclosure. The CDFSE surface enclosures are designed to mount flat on the ceiling and extend only six inches into the room. Type CDFRE enclosures have no protrusions outside the recess box, allowing the heater to recess only seven inches into ceiling space. Mounts into permanent ceiling with trim ring. A thermal cutout shuts off the heater in the event of overheating and reactivates the heater when the temperature returns to normal. Optional thermostat mounts inside unit to control room temperature. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life. Comes in a navajo white finish. This unit requires mounting sleeve to be installed.

Qmark CDF ceiling-mounted fan-forced heaters are designed for commercial and industrial areas requiring electric fan-forced heat. This product does not include the mounting enclosure. The CDFSE surface enclosures are designed to mount flat on the ceiling and extend only six inches into the room. Type CDFRE enclosures have no protrusions outside the recess box, allowing the heater to recess only seven inches into ceiling space. Mounts into permanent ceiling with trim ring. A thermal cutout shuts off the heater in the event of overheating and reactivates the heater when the temperature returns to normal. Optional thermostat mounts inside unit to control room temperature.. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life. Comes in a navajo white finish. Mounting sleeve required for installation.

Fan Forced Heavy-Duty Ceiling Mounted Heater, 4000/2000W at 208V - This high-capacity, heavy-duty fan forced ceiling heaters are designed for use almost anywhere in commercial, industrial or institutional areas requiring electric fan forced heaters in 1500 to 4800 watt capacity range where wall space is not available. They perform exceptionally well in such applications as entryways, hallways, restrooms, stores, detention environments, and similar large areas. They will accommodate pneumatic/electric or low voltage controls commonly used with computerized energy management systems. A 1/4" mesh screen deters insertion of foreign objects. 208 Volts, Phase, 4000/2000 Watts, 19.2 / 9.8 Amps. 21.75 L. 17.13 W. 8.13 H.

Fan Forced Heavy-Duty Ceiling Mounted Heater, 1,500W at 120V - This high-capacity, heavy-duty fan forced ceiling heaters are designed for use almost anywhere in commercial, industrial or institutional areas requiring electric fan forced heaters in 1500 to 4800 watt capacity range where wall space is not available. They perform exceptionally well in such applications as entryways, hallways, restrooms, stores, detention environments, and similar large areas. They will accommodate pneumatic/electric or low voltage controls commonly used with computerized energy management systems. A 1/4" mesh screen deters insertion of foreign objects. 120 Volts, Phase, 1500 Watts, 12.5 Amps. 21.75 L. 17.13 W. 8.13 H.